Skip to main content

Forums

Activate your network - connect, collaborate & be inspired.

5408 Topics
S
Soumya 5992Cadet | Tier 2
asked in Developers Forum
When i am selecting browser list for recorder found issue that "Error occurred while reading browser list from device If the problem persists, please contact your system administrator."

When i am selecting browser list for recorder found issue that "Error occurred while reading browser list from device If the problem persists, please contact your system administrator."

15870
A
Automation Anywhere Team
Z
Zena JungCadet | Tier 2
asked in Developers Forum
About runs JavaScript in a web page, When will Edge be supported?

Runs JavaScript in a web page (Chrome only) To run JavaScript in iFrame, use Recorder package 2.5.0 or above (Chrome only)Required bot agent version: 21.128 or above  Only chrome is supported until version 24,When will Edge be supported?

740
Z
A
AlejandraBonillaCadet | Tier 2
asked in Developers Forum
How to solve error: "Line[number] in : We found an issue that prevents the bot from running. We could not generate the preprocessing file(s) for bot. This could bea problem with the disk space or file permissions. Investigate the system temporary fol

1220
C
Most Valuable Pathfinder
M
Mohamed RaffatCadet | Tier 2
asked in Developers Forum
I have a problem when i try to use Open Excel advanced it`s have always error shape without use it and I can`t run the bot

I have a problem when i try to use Open Excel advanced 

250
C
Most Valuable Pathfinder
A
AazzaNavigator | Tier 3
asked in Developers Forum
Bot Running Device stuck on configuring. I have been running multiple bots all day and have suddenly faced an error where my bot device went from being online to configuring and has stayed on this for quite a while. I have tried already removing the

device and adding the device back but no luck.

2580
A
Automation Anywhere Team
K
Karan 6620Cadet | Tier 2
asked in Developers Forum
Hi. I am new to this platform. Can somebody explain why would we want to use a variable as an "input" type or an "output" type in a bot. An analogy would be appreciated.

Hi. I am new to this platform. Can somebody explain why would we want to use a variable as an "input" type or an "output" type in a bot. An analogy would be appreciated.

280
C
Most Valuable Pathfinder
S
Shikha RahangdaleCadet | Tier 2
asked in Developers Forum
What are the steps give into the mind when we are planning to migrate v11 to Automation Anywhere 360.Do we need to new Production VM or we can use same VM where Automation Anywhere v11 installed. ?

What are the steps give into the mind when we are planning to migrate v11 to Automation Anywhere 360.Do we need to new Production VM or we can use same VM where Automation Anywhere v11 installed. ?

250
Micah.Smith
Automation Anywhere Team
P
Pallu 2067Ground Control | Tier 1
asked in Developers Forum
I'm trying to capture the thing using recorder-capture action on chrome browser , but I'm not able to capture..When i click it showing Chrome plugin error. Already I hv added it to chrome extension. Still i'm facing this issue. Pls help me out

830
A
Automation Anywhere Team
M
MrOzogNavigator | Tier 3
asked in Developers Forum
If validation issue

Hi,Am I missing something obvious, or is it a bug? I create logic.If at line 10 is checking if the object exists, if not, it should go to the next stage - if: Else if (I previously used Else, but it doesn't work as well))but it does not go to the next stage. Instead of moving to the next validation stage is, throwing an error that object does not exist, which is correct. That is why I used if logic here.Do you have any advice?

860
Tamil Arasu10
Most Valuable Pathfinder
A
AazzaNavigator | Tier 3
asked in Developers Forum
Hi, I am unable to locate any of the Windows I have open via the Browser- Close action. I was able to locate the Windows for the Browser - Open action. Is there any reason for this? What's the fix? See image attached below

Hi, I am unable to locate any of the Windows I have open via the Browser- Close action. I was able to locate the Windows for the Browser - Open action. Is there any reason for this? What's the fix? See image attached below

1780
R
A
AnilsinghsonuGround Control | Tier 1
asked in Developers Forum
Client login error

280
A
Automation Anywhere Team
O
ousmane1986Ground Control | Tier 1
asked in Developers Forum
Hi, i would like to know how to enable auto login in my device.

Hi, i would like to know how to enable auto login in my device.

400
C
Most Valuable Pathfinder
S
SARAVANAAGround Control | Tier 1
asked in Developers Forum
Hi All, Recently we migrated a bot to A360, we used metabot to move mails within outlook folders in v11. After migration, we're getting below error while performing the select folder task but launch outlook is working fine in the starting of code.

670
A
Automation Anywhere Team
A
AnilsinghsonuGround Control | Tier 1
asked in Developers Forum
Automation Anywhere atmx file corrupt

Automation Anywhere atmx file corrupt

1460
Tamil Arasu10
Most Valuable Pathfinder
P
Pankaj 1070Navigator | Tier 3
asked in Developers Forum
How to send emails in A360 using dummy emails in the from address.

As in v11, we had to give the mail server and port and we were able to send emails using dummy email ids. Want to know if same can be done in A360. I tried a couple of times but it is only working for email ids which exist in the organization exchange servers.

1040
C
Most Valuable Pathfinder
D
David JansenNavigator | Tier 3
asked in Developers Forum
List to all the Common issue on Automation Anywhere

I've been facing lots of problem either within the bot itself or the automation anywhere, so rather than searching for the fix after meeting those problems i wanted to list all of it. Are there any links/place where Automation Anywhere lists all those common issue? i've been listing all the issue and fixes from the article so far but would be better if there are a more plausible way of doing it

2130
C
Most Valuable Pathfinder
D
David JansenNavigator | Tier 3
asked in Developers Forum
Nothing happen when hotkey trigger is pressed

So when we login to AA and do the setup it gave the notif trigger succesfully but when we press the hotkey to trigger nothings happens. after checking we found out that we got this error is this because the window server 2019 is not compatible with the AA? because it works fine on windows 10. so basically when we do the hotkey trigger it opens the shortcut on the google chrome/ windows rather than running the bot

460
D
W
wang.h2_0Navigator | Tier 3
asked in Developers Forum
popup in VBScript and JavaScript

Hi Teami have tried to use AA360 calling vbscript, javascript and VBA in excel.i have coded popup in the 3 function as MsgBox in VBS, Alert in JS and Msgbox in VBA.i found that only the popup in VBA appeared, popup in vbs and js are all ignored.so is that a normal characteristic in AA360? js and vbs popup will be ignored?

1210
A
Automation Anywhere Team
M
melqueNavigator | Tier 3
asked in Developers Forum
Db Shared Session

Would be really helpfull to use global sessions in DB, is there a way to do that?

920
A
Automation Anywhere Team
A
Andress.RCadet | Tier 2
asked in Developers Forum
I need to see the IP of the control room, is it possible?

Hello friends, a question, I need to see the IP of the control room, is it possible? I understand that the FQDN is the one given to us for the cloud server by my "test" services, so is it possible to capture my IP? or if it is hosted on a local server, by default it should be the public IP of my server, this is because the security personnel need to enable the ports and they are asking me for the static IP of my service or the IP of the FQDN of the control room .

1800
A
R
Reddy 8153Cadet | Tier 2
asked in Developers Forum
In SAP need to identify one object then bot should go for next step

Hi, I want to identify one object in SAP screen, if it is available then bot should go for next step else it should come back.what is the best approach please suggest me.

230
R
S
Sutimon.C2Ground Control | Tier 1
asked in Developers Forum
Can we delete log files to utilize space? C:\ProgramData\AutomationAnywhere\BotRunner\Logs\IR

Can we delete log files to utilize space? C:\ProgramData\AutomationAnywhere\BotRunner\Logs\IR

1410
A
Automation Anywhere Team
D
dominiktaffnerCadet | Tier 2
asked in Developers Forum
IQBot and handwritten numbers. I am trying to extract handwritten numbers from a document with IQ Bot using the OCR engine Tesseract4. The OCR does not recognize certain digits correctly. It interprets for example "4" as "&", see the screenshot.

I selected number as data type. Is it possible to force IQ bot to output a number as extraction result to reduce the amount of possible wrong interpretaions ?

900
Tamil Arasu10
Most Valuable Pathfinder
D
djreveloGround Control | Tier 1
asked in Developers Forum
How to send an email via SMTP OFFICE 365 connection? I am entering the requested parameters but when executing the bot an error comes out: There was an error in sending the email message. Please check your connection details provided and try again.

How to send an email via SMTP OFFICE 365 connection? I am entering the requested parameters but when executing the bot an error comes out: There was an error in sending the email message. Please check your connection details provided and try again.

1300
C
Most Valuable Pathfinder
C
ChanyaCadet | Tier 2
asked in Developers Forum
How to copy the number (just one field not all) from SAP to excel file

Hi Team, ​Could you please help advise how can I copy or bring some amount/field from SAP to the excel file I create? Which optionson the left in automation anywhere (control room) I have to select? Please advise the steps ​Thanks in advance

370
C
Terms & ConditionsCookie settings