Automation Anywhere University

Hello Whats the last day for the project submission  for AI Automation engineer ? like how many days left ? Thank You !!

Hi Community Team / ​@Aaron.Gleason I submitted my project for the AI Automation Engineer (AIAE) Certification on  2nd September 2026.Could you please provide an update on when I can expect my grading or validation results to be reflected in the portal?Additionally, I uploaded a YouTube video demonstrating my project, and I received a comment on the uploaded video regarding the project. I would also appreciate it if you could provide any clarification or guidance related to this comment.Please find the attached screenshot of the YouTube comment for your reference.Submission Details: Name: Arjun AS Submission Date: 1st September 2026 Assessment: AIAE Certification Thank you for your assistance and support.Best regards,Arjun AS 

Hi all,I'm working on my AI Automation Engineer certification use case submission and have run into an issue evaluating my Listing Intelligence Agent. My evaluations get stuck in "Active" status and never complete, 5 are currently stuck (ebay v5, ebay v4, Ebay v3, Ebay v2, TRT Ebay v1).I’ve ruled out: Not a resource issue, other users' evaluations complete fine at the same time. Not a data issue, rebuilt dataset clean, same inputs that succeed via direct "Run." Tried both Evaluate automatically and manually, both hang identically. All underlying tool/bot calls show Completed in Activity history, even during the stuck runs.Suspected cause: I noticed the evaluation stopped progressing right at the section of my Agent's flow that should trigger Human-in-the-Loop (a Human Review Form). All of my agents/bots up to that point show 100% Completed, but nothing happens after that. In a separate evaluation run, I also saw it stop during a bot step that should have triggered Human-in-the-Loop for

Hi Community Team / ​@Aaron.Gleason,I submitted my project for the AI Automation Engineer (AIAE) Certification on 1st September 2026.Could you please provide an update on when I might expect my grading or validation results to be reflected in the portal?Submission Details: Name: Afsawa Khatun Shaikh Organization: Tecnoprism (AA Verified Services Partner) Submission Date: 1st September 2026 Assessment: AIAE Certification. Thank you for your assistance!

Hello Team,I have completed all the required learning paths for the AI Automation Engineer Certification. However, when I try to verify my voucher eligibility, I receive a message stating that the learning path "Agentic Orchestration and Collaboration" is incomplete.I have already completed this learning path and would appreciate it if you could review my account and update the completion status.Details:Name: Sai Kishore Registered Email: meetsaikishore@outlook.com Control Room ID - tnwvp1238773 

Hello Team,I have completed all the required learning paths for the AI Automation Engineer Certification. However, when I try to verify my voucher eligibility, I receive a message stating that the learning path "Agentic Orchestration and Collaboration" is incomplete.I have already completed this learning path and would appreciate it if you could review my account and update the completion status.Details:Name: Sai Kishore Registered Email: meetsaikishore@outlook.com Control Room ID - tnwvp1238773 

Hi Automation Anywhere Team,I am currently taking the AI Automation Engineer Certification and I am having an issue accessing the Control Room provided by the course.The Control Room credentials shown in the “Get Control Room Access” section are the same credentials I received previously, and they used to work. However, they no longer allow me to log in.I receive the following error:“Either your username or your password is incorrect”Error code: UM1110I also tried the “Forgot Password?” option, but I do not receive any password reset email.The course is still showing the same Control Room credentials, so could you please check whether my Control Room account is still active or if the credentials need to be reset/reissued?Thank you!

I’ve tried both Google Chrome and Microsoft Edge and also clear the browser content, etc However I’m still not able to view the Course vide content in “Introduction to the Citizen Developer Career Quest” training course.

 Hi Community Team / @Aaron.Gleason,I submitted my AI Agent Module for the AI Automation Engineer (AIAE) Certification on 21st August 2026.I was informed that validation would be completed within 10 business days. However, as of today (31st August 2026), the portal still shows only "Submission Confirmation" with no grading or validation update.Submission Details:- Name: Sunil Valluri- Organization: Tecnoprism (AA Verified Services Partner)- Submission Date: 21st August 2026- Assessment: AIAE Certification – AI Agent ModulePlease find the attached screenshots of my portal submission confirmation page for your reference.Could you please help check the status or guide me on the next steps?Thank you!

Hi everyone! I’m an Operations Manager currently learning Automation Anywhere and exploring how automation can improve everyday operational processes.For those who have completed the foundational learning paths, which skills or packages were most useful when you started building real automations?I’m particularly interested in practical use cases involving Excel files, CSV data, web forms, and reporting. I’d appreciate any recommendations on what to focus on next.

Hi Community,I accidentally deleted the Bots folder from one of our Control Room user accounts and need help restoring it. Environment: aa-community.cloud.automationanywhere.digitalAffected User: kopdo6478125Deleted Item: Bots folder (under Public > Automation)Currently only the Agentic App Store folder remains. The Bots folder is missing completely. Could anyone help with:1. How to check Recycle Bin for this deleted folder?2. How to restore it if still available?3. Any other recovery options? Attaching screenshots for reference.Thank you.

Dear Team,I completed the required learning paths for the AI Automation Engineer Certification and would like to claim the certification voucher.However, when I check my voucher status, the system indicates that I am not currently eligible.Since I have completed all the specified courses, I would appreciate it if you could review my learning progress and verify my voucher eligibility.If there are any additional courses, requirements, or steps that I may have missed, please let me know so I can complete them and proceed with the certification.I have also attached a screenshot of the eligibility message for your reference.Thank you for your time and support. I look forward to your guidance.Best regards,Nandhana  

Dear @Aaron & @Lu Please help. My Control room doesn't have OAuth Connections what did I do wrong while installing? Please help

Hi, I am working on the AI Automation Engineer Certification project and have completed my Agentic solution development.I have built and tested my solution successfully in my Private folder. After completion, I checked in the Process, AI Agent, AI Skill, Forms, Task Bots, and all dependencies into the Public folder as required.When I try to run the process from the Public folder, I receive the following error:Thank you.

Hi,Greetings, to the Automation Team, Thank you for everything that you do. i am doing these lessons of Document Automation and there are few options that are not available in my control room, just wanted to check if its normal to continue with further lectures without these options available to complete the assessment, I Have highlighted the yellow marked which are not available.in that case is it ok to move to other sessions?  

Hi Team, I am unable to check in the taskbot into public and also i do not have a agent connections option under AI. 

I’m in the final part or the video, I perceive that the field “Creating Learning Instance” is different from the video, because there isn’t the option to change the OCR Provider.I don’t know if that’s the reason, but the Process is not working. Literally the last part of the video. I have double-checked all the data and configurations, and everything appears to be correct.  

Hi Team,I have completed all the required learning paths for the AI Automation Engineer Certification, but I am currently unable to verify my eligibility for the certification voucher.When I check my voucher eligibility, I receive the following message:“Sorry, Arjun. It appears you are not qualified for the voucher.”I have attached a screenshot of the voucher verification message for reference.Could someone from the Community team please help me verify my course completion status and confirm whether I am eligible for the certification voucher?I have completed all the required courses. Please let me know if there are any additional requirements or steps that I need to complete to become eligible for the voucher.Thank you for your assistance.Best regards,Arjun A.S.

I am doing the Getting Started with MCP Agent Connections course in which we need the URL for REST web services. In the video it is mentioned that the URL is in the video description, but the URL is not there.

Hi, I am part of the AI certifinatoin week 2.I have an isssue while running the AI skill from the task bot, it throuws me an error null with in the task bot.I have no issues while running it from AI Skill, it generated me an output, but the same does not happens from task bot.I am using AiAE - Skills model connection for AI skillsModel: calude-sonnet-4.6Vendor: Sutomation AnywhereDescription: Use this for your AI skills in the AIAE Certificatoin

Hi Everyone,I am running a learning instance in a test mode, i have set the the default properties along with ABBYY Provider and then once i uploaded the process in test mode, it is getting failed.Error message:There was a problem at line 1 This may be due to the following reason: An unexpected error occurred. null Please contact system administrator. Location: Test Mode-Invoice Extraction 1_extractionbot (line 1) To continue, edit the bot and fix the error. Then, try again. If you continue to see this message, please contact your system administrator.Thanks

Did you miss APA Training Camp? Don’t worry! The courses are still available and you’re in the right place! Below, we have highlighted all the courses and activities for both trails, starting with the Developer Trail and then below that, the Automation Leader trail.Sign up here to gain all the access you need to complete the courses.Developer APA Training Camp Course & Activity ListWelcome to the APA Training Camp | Developer Track Guide! Agentic Process Automation Training Camp is a comprehensive 4-week virtual training program designed to accelerate AI adoption within organizations. This free course trail is designed to help Developers successfully build end-to-end Agentic Process Automations (APA).➡ To start the Developer track, go here to the APA Developer Masterclass and click “Start Now.” This ensures that you’ll get your certificate after completing all the courses. Below you’ll see an overview of the courses, along with weekly activities to support your learning. This cours

Hi All,Has anybody completed the AI Automation Engineer Assessment Test and got the results ?If so please share your experience. Thanks in advance!!!!

Hi there,I downloaded the resources from the chapter “Getting Started with Autonomous AI Agents” and uploaded the files after unzip. However, the file was marked as “OTHERS” and I’m unable to open it.  Could you please take a look and help me resolve this issue?Link of the resource: https://developer.automationanywhere.com/downloads/ai_agent_support_files.zipThank you so much!

Hi Aaron,I am currently working on Capstone Project Part 3 and have encountered an issue with my OAuth connection.The OAuth connection has been created successfully, but it is not appearing under My Settings → OAuth Connections, so I am unable to proceed with the next steps of the project.I have verified the connection configuration and assigned the required invite role, but the connection list still shows 0 connections.Could you please help me check if there are any missing permissions, role assignments, or configuration settings preventing the OAuth connection from appearing for my user account?Thank you for your support.