Skip to main content

Developers Forum

The place for Developers to share and learn.

  • 4,470 Topics
  • 12,623 Replies
4470 Topics
R
Rhys18Ground Control | Tier 1
asked in Developers Forum
Hi, I'm new to Automation Anywhere. I just installed automation anywhere and want to install Chrome Extension. My chrome is installed but automation didn't detect it and it's throwing error occurred while reading browser list from device. Help me !

Hi, I'm new to Automation Anywhere. I just installed automation anywhere and want to install Chrome Extension. My chrome is installed but automation didn't detect it and it's throwing error occurred while reading browser list from device. Help me !

830
C
Most Valuable Pathfinder
A
Abhi25Navigator | Tier 3
asked in Developers Forum
BOT Scheduling Logic

Hi Guys, Let's say I have a bot scheduled to run 3 times in a day. On the first scheduled run, BOT was unable to find the input file required for processing, so it ended sending out a notification to the stakeholders. On the second scheduled run for the day, it found the input file, completed the processing and it deletes the input file at the end. Now, for the third schedule, the bot should not run since it has already processed the input file in second run. Can anyone please help me achieve this logic?

320
Tamil Arasu10
Most Valuable Pathfinder
G
Guru.LGround Control | Tier 1
asked in Developers Forum
Had issue while installing ODBC driver with ms office 2019

Had issue while installing ODBC driver with ms office 2019

560
C
Most Valuable Pathfinder
R
Riya7210Cadet | Tier 2
asked in Developers Forum
Hii, I am in the course : AUTOMATING TASKS USING AUTOMATION 360 UNIVERSAL RECORDER. Running a bot for currency exchange rates. After following all the steps my bot doesnt runs and an error pops up. Please find attached screenshot for your reference.

Hii, I am in the course : AUTOMATING TASKS USING AUTOMATION 360 UNIVERSAL RECORDER. Running a bot for currency exchange rates. After following all the steps my bot doesnt runs and an error pops up. Please find attached screenshot for your reference.

440
R
H
Hemalatha.B2Navigator | Tier 3
asked in Developers Forum
Need help on A360 Task bots

Hi All, In my project, I need to place A360 code files into Github. While uploading in Github I am not able to upload Code files(Zip which extracted from Control room) it is saying file size is having more than 25 MB.. Any other way to export file in A360 apart from Control Room because from control room code file is getting bigger like more than 200 MB (it is having jar files etc) Also Please let me know on below queries.1)I have created 5 taskbots in control room.But now where that 5 taskbots code will be located in server/machine?2)If it is available in server/machine can we upload directly only those task bots into Github(Not export from control rom).If yes, How can third person use those 5 taskbots .

480
A
Automation Anywhere Team
T
TimV 5573Cadet | Tier 2
asked in Developers Forum
Downgrading to v2 Chrome plugin is giving inconsistent results

We're on the cloud offering of AA360 - and with the latest update to our cloud servers (.26 which pushed the v3 chrome plugin) some of our bots that rely on screen record/capture fail.The solution presented to us was to down grade our Chrome plugin to v2 as outlined here:https://apeople.automationanywhere.com/s/article/Switch-Manifest-V3-to-Manifest-V2-extension-manually/p> The problem I am seeing is - I've done this, but when I go into Chrome developer tools - the click applications, and then service workers then see all registrations, I don't see the chrome extension ID I expect to see: 'kamm...(v2)', but instead I see 'bboc...(v3)'. So our bots that rely on communicating with chrome are failing with an HRESULT type error. But I've reinstalled the v2 chrome plugin under the account the bot runs on, and confirmed the v3 agent is disabled. There needs to be clearer explanation around what they mean by chrome profiles - and how to ensure v2 plugin is

540
T
R
RENATOS101774Ground Control | Tier 1
asked in Developers Forum
Is there a way to rotate/manage bot agent credentials using Tycotic on A360 (on-prem)?

I would like to manage bot agent credentials through third-party Secret Server, in this case, I have to integrate Tycotic with A360, not only to act as credential vault for apps credentials, but to rotate bot agent password as well.

530
A
Automation Anywhere Team
R
RJ 2917Ground Control | Tier 1
asked in Developers Forum
Issue with Credentials

I cannot add Credentials under Device and thus cannot move forward with Running Bot or creating Bots. It shows error:"Not FoundIf the problem persists, please contact your system administrator." See the screenshot attached.

590
A
Automation Anywhere Team
R
reza 6198Ground Control | Tier 1
asked in Developers Forum
Bad gateway after upgrading AA360 Control room and360 IQ Bot

I upgraded AA Control Room 360 and IQ Bot 360 to latest version but I get the" bad gateway" error on both URLs, I tried to troubleshoot according to suggestions in:Apeople :https://apeople.automationanywhere.com/s/question/0D56F00007jtFP2SAM/in-control-room-it-is-showing-bad-gateway-even-after-restarting-the-serviceshttps://apeople.automationanywhere.com/s/article/A2019-Control-room-Not-accessible-after-Installation-502-Bad-Gatewaybut the problem is still occurring and services are down. troubleshoot steps which I performedServices are started and using AD accountsSQL is accessible Health Check URL (http://localhost:8100/healthcheck) shows services are be ok Would you please help me with this?

7490
A
Automation Anywhere Team
S
Sonny.YNavigator | Tier 3
asked in Developers Forum
How to search name ('first name' 'surname') in an excel file with two columns A - first name, B - surname.

1490
Tamil Arasu10
Most Valuable Pathfinder
S
sim 8841Cadet | Tier 2
asked in Developers Forum
Hello, We are repeatedly getting an error pop-up when we try to run the task on the Community edition. The error pop-up says UNKOWN: User:(user id) is already running a bot on the device: (device name). thank in advance

Hello, We are repeatedly getting an error pop-up when we try to run the task on the Community edition. The error pop-up says UNKOWN: User:(user id) is already running a bot on the device: (device name). thank in advance

2570
M
S
Salman KSCadet | Tier 2
asked in Developers Forum
Is alm end point available for a360 for exporting bots using the file path?

v1/alm/export was available for v11 to export package by specifying file path as { "filePath":"$bothfilefilepath$", "destinationPath":"$savetofilepath$", "packageName":"$PackageName$"} is the same available for a360? than using file id?

790
Paul Hawkins
S
Steve 789Cadet | Tier 2
asked in Developers Forum
Hello, I am trying to figure out how to deal with duplicate entries in an Excel spreadsheet using a loop action. Can anyone help me with this? I need to watch a video to help me learn this. Please help. Thank you.

Hello, I am trying to figure out how to deal with duplicate entries in an Excel spreadsheet using a loop action. Can anyone help me with this? I need to watch a video to help me learn this. Please help. Thank you.

3560
Tamil Arasu10
Most Valuable Pathfinder
S
s.aliNavigator | Tier 3
asked in Developers Forum
Email Attachment - does not attach - A360

Hi,  I'm trying to attach CSV File to an email. At first i thought it was my variable causing an error...So I thought i would do a simple test and directly attach the file (e.g. C:\Users\User\Documents) with no variables for its location - The email sends but no attachment. Then I did another test by trying to put the location in to see if a 'File open' command works... - it works. Used the same location to attach file - file attachment still does not work but email sends?

7430
Tamil Arasu10
Most Valuable Pathfinder
C
cristian.popaCadet | Tier 2
asked in Developers Forum
Hello, We are actively preparing the architecture solution for our migration from v.11 to A360. We have a few questions for which we couldn't find the answers in the online documentation. Thank you for your answers.

Can the CR cluster use a network file system as a storage solution? Any reasons not to?Having a CR cluster planned, does it alter the basic requirements we have seen in the documentation and are there any specific prerequisites? (software, hardware, network) Documentation used:https://docs.automationanywhere.com/bundle/enterprise-v2019/page/enterprise-cloud/topics/deployment-planning/on-prem-install/cloud-prerequisites-control-room.html/p>https://docs.automationanywhere.com/bundle/enterprise-v2019/page/enterprise-cloud/topics/deployment-planning/on-prem-install/cloud-requirements-server-hardware.html/p>

460
A
Automation Anywhere Team
M
MaggieW103794Navigator | Tier 3
asked in Developers Forum
Events will not reconcile

I have two workspaces that will not run anything, schedules just queue up and never kick off. I can see in the node manager logs that each machine has a similar problem - there is an event that cannot reconcile. I believe these were bots that were running, crashed for whatever reason, and then the tokens expired. Now, the events continually try to reconcile but cannot. My question is, how do I clear these events so that bots can run? This is the message I see in the Node manager where it fails to reconcile:message: "{\"code\":\"UM1111\",\"details\":\"To be safe, we logged you out. Please login again.\",\"message\":\"Your session expired\"}"

2890
M
D
Danny_0Ground Control | Tier 1
asked in Developers Forum
Unable to find course "Introducing Automation Anywhere Robotic Interface (AARI)"

I'm currently in the learning path "Bot Developer (Automation 360) and it tells me that the course "Introducing Automation Anywhere Robotic Interface (AARI)" is a prerequisite and won't let me continue until I've taken it. However, I cannot find this course anywhere in the content library. A colleague had previously taken it, but can't find it now. Has this course been removed from AA University? Thanks for any help

230
A
Automation Anywhere Team
A
Aldo LanfranconiCadet | Tier 2
asked in Developers Forum
Find chracter on a string variable, and select from there

Hello, I have a String Variable that contains a route Path, for example C:\MainFolder\SubFolderExample1\FinalFolderWhat I need is to find in that variable the last "\" and from there to the end assign to other variable. For Example: Let´s say I have "V_Path" and "V_Out" where:  Thanks in advance for your help!

350
A
M
MRengel80Cadet | Tier 2
asked in Developers Forum
Every day I have to uninstall and reinstall the Bot Agent in order to get bots to run.

The error that I usually get first thing in the morning is attached in a screenshot. (Unexpected Error getting jar attributes) I can work around this by clearing the C:\ProgramData\AutomationAnywhere\GlobalCache folder on my machine,and then uninstalling the bot agent, reinstalling the bot agent, deleting my connection to my device in Control Room, and reconnecting to my deivice. However, this is tedious and not something I want or should be expected to do every single day I use Automation 360. Please help.

2730
M
D
deivid 6719Cadet | Tier 2
asked in Developers Forum
microsoft basic autentificacion deprecated

Hola,  Tenemos unos bots implementados en el 2020 que hasta el jueves pasado han estado conectandose al exchange online perfectamente y han dejado de funcionar.  Estamos intentando implementar la nueva autentificacion basada en OAUTH pero cuando pulsamos el boton authorize en el componente nos devuelve este mensaje Request Id: 2db786ee-6cfa-4e53-b4d2-c1d006b40c00Correlation Id: 3541b297-cf99-442d-a9c6-8dcff723c8e6Timestamp: 2022-10-25T10:45:18ZMessage: AADSTS900971: No reply address provided. no conseguimos conectarnos, ¿que podemos hacer?

584
Tamil Arasu10
Most Valuable Pathfinder
M
msaveCadet | Tier 2
asked in Developers Forum
Format for PEG customer provided certificates. I'm providing openSSL cert but get an error.

While installing PEG the verification script for the certificates is giving me some errors.... Can you please help or advise me on what to do? I tried the two formats recommended (openssl or PKCS #8) Validating /peg_v/certs/analytics-cert.pem and /peg_v/keys/analytics-key.pem***ERROR! /peg_v/certs/analytics-cert.pem domain, , does not match expected domain, analytics-fiq-400901ef-8c0f-4e2d.xxxx.com!***At least one of these has incorrect values: /peg_v/certs/analytics-cert.pem, /home/peguser/.kudzu/apex_domain.txt, /home/peguser/.kudzu/appliance.txt Enter pass phrase for /peg_v/keys/analytics-key.pem:***ERROR! /peg_v/certs/analytics-cert.pem and /peg_v/keys/analytics-key.pem are not valid pairs!***/peg_v/certs/analytics-cert.pem md5 = (stdin)= a9cbb460c4996cf1af1a84e9f4d1a3b0/peg_v/keys/analytics-key.pem md5 = (stdin)= 5d27f1f96bb6f7b1c97e5c63b3b9a12e

240
M
K
Kamal.AGround Control | Tier 1
asked in Developers Forum
i have completed RPA program manager but i didnt recieve the badge.

i have completed RPA program manager but i didnt recieve the badge.

450
Tamil Arasu10
Most Valuable Pathfinder
T
Tim 1914Cadet | Tier 2
asked in Developers Forum
Getting Started bot capture function not working

I was following the steps in the Getting Started With Building Bots document and ran into an impasse. Browser: Chrome 106.0.5249.119Extension: Automation 360 3.0.4.0Bot agent version: 21.222 Description:When I use the capture tool in the recorder package, no red highlight appears around any object on the source web page. Usually there is no error message. The recorder simply does nothing. Occasionally an error message will appear:com.github.kwhat.jnativehook.NativeHookException: Failed to register low level windows hook. I’m guessing I have a file or program that needs to be updated, but I’m not sure what. Do you know the cause of the issue? Already tried:Resize window optionVerifying that Chrome is zoomed to 100% and PC is at 1920x1080Using Microsoft Active Accessibility, Microsoft UI Automation, and Microsoft UI Automation (COM)Capture AnchorVerified bot agent is running on my PC I couldn't find any google results for the "low level windows hook" error.

1370
T
G
gauravr13Navigator | Tier 3
asked in Developers Forum
Insert values into SAP from excel

Hello, I have to insert a column from excel sheet (excluding header) into one of SAP table. Can someone suggest how this can be done.

4920
G
L
LesleyCadet | Tier 2
asked in Developers Forum
I have inserted values into a excel sheet,I want to find out how do I insert the data that I have inserted to automatically populate my graph in the same sheet?

I have inserted values into a excel sheet,I want to find out how do I insert the data that I have inserted to automatically populate my graph in the same sheet?

260
L
Terms & ConditionsCookie settings