Developers Forum

Is there a way to fetch runner status information from the control room in A360?If so, is it licensed and what are the details?

What are your best practices for determining elapsed time in Automation Anywhere?Let’s say a bot begins at 11:30pm on December 31, 2023. The bot finishes at 4:00am on January 1, 2024. It had a total runtime of 4 hours, 30 minutes.How would you programmatically determine the elapsed time in the bot editor using the Datetime packages?I can make an elaborate block of code with some if/then’s and type conversions between datetime and number values. But is there a simpler way?

Hi,Automation Anywhere is not able to read the Ui Elements in Apache Airflow tool. I am looking for some support on this. How to perform RPA automation on Apache Airflow tool?

Olá, boa tarde Recebi o login para acessar o Automation Anywhere Community, porém, não consigo com o mesmo login e senha acessar o control room, ao solicitar esqueci a senha, não é enviado nenhum e-mail para login. Não recebi nenhum e-mail sobre como acessar o control room, verifiquei no spam e tambem não existe nenhum e-mail. Poderiam me ajudar? Obrigada

Hi… Need a help !!!!My requirement is to navigate to a panel using mouse hover and click a field in the panel …. How can I automate this using existing packages in automation 360

I have tried connecting to Gmail using imap but it says credential error. I have checked the credentials and they are correct. I am not able to understand why the error is showing up. Hostname: imap.gmail.comPort number: 993

Thrilled to share my recent contribution to The United Way Bay Area, a cause close to my heart! Special thanks to Automation Anywhere for introducing such a remarkable and innovative challenge.Hats off to Arjun S Meda for setting the stage with a stellar introduction to the challenge. His passion and dedication truly inspired us all.

Hi All, hope you are well I would like to know what is the maximum number of concurrent A360 API calls supported by A360 Control Room. We have a custom solution that sits on top of A360 Control Room and uses A360 APIs to perform its actions. I’ve seen from A360 CR Config that there are some Timeouts but I would like to confirm what are the exact values that we need to take into account to calculate the maximum concurrent A360 API calls supported without affecting A360 CR performance. Thanks a lot for your help and support Best regards,Alejandro   

Hi,I think there is possible bug with excel advance package. When “Excel Advance: Find” action is performed on the excel column which has long number values the bot doesn’t find the value.The excel changes the format of the long number value to exponent format. If we try manually doing find, we will be able to find the value, But when performed through “Find” command the bot doesn’t recognize the value and returns empty output.Has anyone encountered this anytime?

After migration from v11 to A360   When I try to run master bot is shows me this error ​This is line number 175 which is running task bot​​And this error is showing by task botthis is task bot ​

 When I try to run master bot is shows me this error 

I want to create an IF action that checks if a certain application is running. As you know, this action uses the full path to the executable in order to check if it is running: What if I am using different runner machines, each with their own usernames in the path to the app? I would want to wildcard the part that is variable to avoid the bot breaking. My problem is that wildcards (*) does not seem to work in this instance. For example, if I wildcard the username like below, the bot will not register that the application is running: What would you do to get around this?

Hi I have below data in JSON response through Rest API. Could you please help me to get the opened_by node value.Thanks,Ajay {"result":[{"parent":{"link":"https://adientdev.service-now.com/api/now/table/task/e62b23d9dbad44dc0b6dc7ec0b96194e","value":"e62b23d9dbad44dc0b6dc7ec0b96194e"},        "made_sla":"true",        "watch_list":"",        "sc_catalog":"",        "upon_reject":"cancel",        "sys_updated_on":"2020-03-26 13:09:26",        "task_effective_number":"SCTASK0268655",        "approval_history":"",        "skills":"",        "number":"SCTASK0268655",        "sys_updated_by":"jdasji",        "opened_by":{"link":"https://adientdev.service-now.com/api/now/table/sys_user/1a180baedb3a1f04fd8fd855ca961961","value":"1a180baedb3a1f04fd8fd855ca961961"},        "user_input":"",        "sys_created_on":"2019-12-05 14:52:31",        "sys_domain":{"link":"https://adientdev.service-now.com/api/now/table/sys_user_group/global","value":"global"},        "state":"-5",        "route_reason"

tried opening a word window using the following codebut its still not opening the window even if it is running already and giving the following errorThere was a problem at line 460This may be due to the following reason: Unable to find '.docx - Microsoft Word' because the application is not running. Exception occurred at line number 354. You chose to mark the bot as 'Failed' in case of any encountered errors. To continue, edit the bot and fix the error. Then, try again. If you continue to see this message, please contact your system administrator. 

Hi ,I know that once a learning instance is created you can edit it in staging environment to add more fields to extract, however is there a way to remove some fields which you don’t want to extract anymore or reorder the order in which fields are extracted and outputted in the csv file.

While integrating the Speakatoo API into my project, I'm encountering a cookies error. Seeking assistance from anyone familiar with this issue.

Hi everyone,I have a question about the file extension. I would appreciate it if someone who knows answer.I’m sending screenshots below.I want to get the name and extension of the pdf file with the “Loop>file for each file in folder” command.But even though the extension is pdf, it appears as null. (I want to email the pdf file but it doesnt read the file.)Where am I doing wrong and how can I fix it?Thanks in advance 123 

I am currently working on automating a process in which the bot is expected to perform a transaction in PW1, navigate to a specific location, select a file, and then load it into SAP BW. To achieve this, I initially executed a transaction labeled "RSA1" in PW1 and recorded the actions taken during this process.My intention is to replicate the same actions in SAP from within Automation Anywhere (AA) using the VBScript Open and Run action. Although I receive a message indicating that the bot ran successfully, I've noticed that there is no actual execution of the recorded actions as scripted in the VBScript.As a newcomer to the world of RPA, I'm seeking assistance in completing this task and resolving the issue I'm encountering with the automation process. Your guidance and expertise in this matter would be greatly appreciated. 

Good morning,today, automated services have not worked. On many bots, errors occurred on the "if" tasks of the "Empty" and "no Empty" conditions. Have you changed anything?  

Hi,I have a requirement where i need to read the email attachments and do some action on that.Email connect is working , when it is trying to process Loop it gives me an error “The provided connection details are invalid.”Kindly do the needful.  

I am attempting to retrieve only header text from dynamic websites as we are not sure of the exact location of the header texts that varies from website to website and some of the web sites taking more time open, I have tried but no luck on it. I would greatly appreciate it if you could give some light on it. 

I’m having difficulty setting up an email trigger using “Connect to Email: Outlook” for a Shared mailbox for when a new email appears in a folder of the Shared mailbox.Has anyone else ever attempted such an endeavor with this setup?I have validated that using “Email: Connect” that the bot/digital worker is able to connect to the Shared mailbox, check if a folder exists, move messages around within the Shared mailbox and “Email: Disconnect” so it doesn’t appear to be a permissions issue.

Olá, alguém consegue me ajudar?Estou tentando rodar um task na minha máquina, mas está dizendo que está sendo executado em outra, sendo que eu já desloguei dela e desconectei o AA dela, alguém sabe o que fazer nesse caso? micrômetro | 

I ran a process on a bot runner device that was no longer in use.  When I tried to delete it by using the STOP command, it didn't stop it, but rather made it so all other commands (like pause or resume) not work and throw the error “None of the selected items can be xxxxxx” where xxxxx is the type of command, like paused, resumed, stopped.It is not causing an issue with the other botrunners, but I don't like seeing this process in an Unknown state.So my question is how do you delete a ‘ghost’ process activity, that cannot be deleting using the limited actions provided.Thanks

Hi, We’re trying to upgrade our On-Prem A360 instance from v24 and need the v27 upgrade file if anyone has the link to box? Thanks in advance. Paul