Skip to main content

Community Edition

Connect with your Community Edition peers - share getting started tips, problem solve, and collaborate as you build automations.

  • 869 Topics
  • 3,173 Replies
868 Topics
A
Alonso AlvaradoGround Control | Tier 1
asked in Community Edition
Ingreso a Community version

Como instalar la versión Community, ya que completo el formulario, pero no me llega ningún correo.Saludos.

17302
Raul Jaimes
interplan
interplanNavigator | Tier 3
asked in Community Edition
I am not able to get a value of a field from an html5 table from a website

I'm using A360 in the Community version. On this site (https://www.anbima.com.br/pt_br/informar/tabela-de-indicadores.htm), I need to obtain the value 0.09, which is in the line "IGP-M1 Projection (Feb/23 ) -0.09". It turns out that when I use the Capture / Recorder action, only the table is marked and it is not allowing me to select only the field whose value is 0.09. How can I do this? I already tried with Chrome and with Edge , but I couldn't.https://www.anbima.com.br/pt_br/informar/tabela-de-indicadores.htm

360
interplan
A
AnilB4022Cadet | Tier 2
asked in Community Edition
Community Edition - unable to connect device with CR

Hi team,Creating this ticket on behalf of my colleague.He is not able to connect the device with community edition CR as there is some activity running.He deleted all the artifacts related to it and struggling with the issue.His id is vimishra@deloitte.comPleas keep him in loop when replying to this thread.

4643
P
R
Ralph.ACadet | Tier 2
asked in Community Edition
How to loop through sent items in gmail

As per the docs portal it mentions to access the folders using [Gmail]/FOLDER. But i’m unable to use this to loop through the sent folder. Is there a solution for this?If I use [Gmail]/Sent, I get a folder not found error like belowIn mailbox [Gmail]/Sent folder not found because aaac NO[NONEXISTENT] Unknown Mailbox: [Gmail]/Sent (Failure) https://docs.automationanywhere.com/bundle/enterprise-v2019/page/enterprise-cloud/topics/aae-client/bot-creator/commands/cloud-email-action-loop.htmlGmail: To retrieve emails from the default folders, you must use [Gmail]/FOLDER, except for the Inbox folder. For example, [Gmail]/Draft, [Gmail]/Important, [Gmail]/Trash, and so on. To retrieve emails from the folders you have created or the Inbox folder, you must specify the folder names as they are. For example, if you have created folders called Bank and Sports in your Gmail, specify Bank and Sports without the [Gmail] prefix to retrieve emails from these folders.

24829
Padmakumar
Emerson.F2
Emerson.F2Navigator | Tier 3
posted in Community Edition
SAP ABAPI - Exemples

Hi everyone, I hope you are all well…So I was studying how to use ABAPI package, my question is..Does anyone already use this package if so can you give me an example? this sounds very complex :/ Today I’m using VBs for automate the SAP, but I want learn how make this direct conection 

804
S
A
Anthony YeoCadet | Tier 2
asked in Community Edition
How to I whatsapp a picture to my client?

How to I whatsapp a picture to my client?

2815
C
Most Valuable Pathfinder
H
Harika 1170Cadet | Tier 2
asked in Community Edition
read column names in excel

how to read column names in excel, where the position/index of column name changes for each file

6441
Padmakumar
P
pablo 2030Navigator | Tier 3
asked in Community Edition
there was a problem with my credentials

Hi everybdy,I’m trying to do login in a web page. I can’t access to my credentials:login with credentials​​​​problem with credentialsHow can I fix this error?? Why I get error in line #0 if there isn´t line #0 in my code??A lot of thanks :) 

25847
P
S
Shusha321Navigator | Tier 3
asked in Community Edition
An unexpected problem occured during taskbot deployment

Hi, Good day! Does someone here has an idea on how to fix this error “ An unexpected problem occurred” ? I can’t successfully run a taskbot in botcreator because of this prompt error. I don’t know where it started and how to fix this. So I’m here asking for your help and guidance. Thanks in Advance.

9734
Raul Jaimes
A
Asif 3500Cadet | Tier 2
asked in Community Edition
How to Download automation anywhere community edition desktop version?

I am new to automation anywhere, for learning purpose I want to install automation anywhere community desktop version, please suggest from where can I download the setup?Thanks

22452
A
O
Olga.CCadet | Tier 2
asked in Community Edition
Hi, I get this error "Automation Anywhere\System file not found in repository in PUBLIC workspace" while trying to capture object through "Recorder Action". How can I solve it? Thanks

Hi, I get this error "Automation Anywhere\System file not found in repository in PUBLIC workspace" while trying to capture object through "Recorder Action". How can I solve it? Thanks

17269
Raul Jaimes
S
Sujitha 9629Cadet | Tier 2
asked in Community Edition
Can we assign single Runtime license to primary and secondary recourse

Hi All, Will it possible to assign signal runtime license to primary and secondary resource?For eg: If primary resource is absent can same runtime license will be assigned to secondary resource for execution. or both resource need 2 different license    

935
S
S
Simant 9443Ground Control | Tier 1
posted in Community Edition
Email read in ascending order in AA2019 Community edition

I want to read email in ascending order For Email services , as its descending by deafult,I am a beginner, Please assist

1462
rbkadiyam
Premier Pathfinder | Tier 7
R
Revathi.S1Cadet | Tier 2
asked in Community Edition
AA360 device not deleted its active bot of deployment

Can anyone tell me the solution 

1077
C
Most Valuable Pathfinder
M
Cadet | Tier 2
MJ 8116Cadet | Tier 2
asked in Community Edition
Unable to connect bot agent - Unexpected error occurred

Hi team,We trying to setup 15 computers for A360 training purposes and activity but were unable to setup the community edition successfully.We can install the bot agent but we cannot connect to it, keeps getting an error message.Unexpected error occurred please contact your system administrator. 

59818
C
Most Valuable Pathfinder
S
shahankhanGround Control | Tier 1
asked in Community Edition
My device is not connected to control room

I am unable to connect my device with control room. showing following error:-Unable to connect to the Control Room.This may be due to multiple reasons. To continue, please 1. Check to see if you have network connectivity 2. Check to see if you are connected to your VPN Then, try to run the bot again.If you continue to see this message, please contact your system administrator.Code: registration.error

6423
Padmakumar
K
KG 2311Cadet | Tier 2
asked in Community Edition
How to Kill Running Process from Control Room A360 Community Version 

How to Kill Running Process from Control Room A360 Community Version  

15904
C
Most Valuable Pathfinder
J
JustinKNavigator | Tier 3
asked in Community Edition
TYPE_014 ERROR CODE

Hi All,  I’m attempting to start playing with automation anywhere, so I’m using the community edition.  I imported a couple of the free bots so I can run/evaluate them (shopping assistant, car search), however I’m having trouble running them.  The shopping assistant doesn’t create a log file as far as I can tell, but displays message boxes saying how each of the website (CVS, Walmart) searches encountered a problem.  The car search runs, but gives me the following in the log file :Plug-in action failed. Make sure that your browser plug-in is properly installed and enabled. For more help with this issue go to A-People, the Automation Anywhere community forum. Error code:TYPE_014I do have the plugin installed/enabled.  There is a post on this community (‘Facing TYPE_014 ERROR CODE’) that includes a link to a resolution, but I can’t access it because I’m not yet a customer :(If anyone could offer some guidance on the above I’d really appreciate it as I’m trying to demo Automation Anywhere

79814
J
M
muskan.jCadet | Tier 2
posted in Community Edition
conversion of pdf

hey I wanted to convert pdf into excel sheet can anyone please help me  to get out of this problem???? 

5973
Raul Jaimes
K
Kaviti MoulikaCadet | Tier 2
asked in Community Edition
IQ Bot error

i get the error like this “Remote service call erred out '! IQB.Exception.generic!” at iq bot upload document

6751
Raul Jaimes
H
HernandoCadet | Tier 2
asked in Community Edition
Como cifrar informacion desde el control room version AA 360

Hola a todos,Alguien podria por favor indicarme como cifrar (encriptar la información) desde el control roomMuchas gracias

792
C
Most Valuable Pathfinder
S
shankarsiva222Ground Control | Tier 1
asked in Community Edition
when i am running the databse read i am gettng this error

Operation is not allowed when the object is closed

3273
rbkadiyam
Premier Pathfinder | Tier 7
B
basoGround Control | Tier 1
asked in Community Edition
Cannot access to Gmail folders (or tags) with spaces in the name

How to move a Gmail Inbox email to a folder (tag) with spaces in the name?It seems that it cannot find the folder.Or how to list all the folders in the account to see how the names are structured.Thanks in advance.

811
rbkadiyam
Premier Pathfinder | Tier 7
A
Aarti 4396Cadet | Tier 2
asked in Community Edition
AARI ASSISTANT is not available

While I am open the AARI assistant, after login it’s show the error - The AARI Assistant is currently not available for users without an Attended user license. 

68412
rbkadiyam
Premier Pathfinder | Tier 7
B
basoGround Control | Tier 1
asked in Community Edition
Validate email subject with a word and numbers?

How validate (boolean) a list of mails that match “*Order*[0-9]+*” in subject? Note:Sample Subject: “Order 123456”The RegExMatch whuld be: “^.*order.*[0-9]+.*$”I dont understand whow use RegEx to validate a string as a boolean.Thanks.

990
B
Terms & ConditionsCookie settings