Skip to main content

Developers Forum

The place for Developers to share and learn.

  • 4,118 Topics
  • 10,853 Replies
4118 Topics
Polyana 8891
Polyana 8891Navigator | Tier 3
asked in Developers Forum
Problem handling sharepoint session

I'm trying to use a task: execute passing the session that was authenticated to another task, but when this is executed it returns the following error: 'session' expecting 'SharepointSession' received 'SharepointSession'.I have already checked the variables used, testing the task that is called individually, it works, as long as authentication is passed, but if I try to pass the sharepoint session as input, the error persists. Any idea how to resolve it?  

1111
R
10 months ago
A
Ajit Kumar.SCadet | Tier 2
asked in Developers Forum
System allows only a single device to be registered

 System allows only a single device to be registered. If you need to replace your existing device you should delete it first.If the problem persists, please contact your system administrator.Code: devicemanagement.register.validation.single.device Note:I tried to reinstall/repair bot, tried to stop/restart the service and when I tried to delete Cannot delete device, as it is part of an active bot deploymentIf the problem persists, please contact your system administrator.

1383
R
10 months ago
F
Fray 4974Cadet | Tier 2
asked in Developers Forum
Use A360 pure cloud as onpremise

Hello, can I use this   as an onpremise version besides that it said pure cloud?

251
R
10 months ago
S
SAdamsCadet | Tier 2
asked in Developers Forum
Recorder does not return entire table. It only captures the first 37 rows at a time.

I am trying to capture a web table and save the table contents to a variable. The capture is only capturing the first 36 rows of information when there are more rows than that. I am not sure how to get the recorder to capture the entire contents of the web table. Any advice is appreciated.

857
R
10 months ago
P
PedroCavadasCadet | Tier 2
asked in Developers Forum
Run Stored Procedure "ClosableSessionImpl" error

I’m trying to execute Run Stored Procedure using a MariaDB ODBC connection on A360, but I’m getting the error “’session’ expecting ‘ClosableSessionImpl’ received ‘ClosableSessionImpl’”. Already searched the docs for any solutions but couldn’t even find this error documented there, neither anywhere else. How can I solve this?

1412
P
10 months ago
R
RajeshS106234Navigator | Tier 3
asked in Developers Forum
Bot Launcher for User Session [Username]Crashed. Last recorded command at line number 0

I'm encountering an error (Bot Launcher for User Session [Username]Crashed. Last recorded command at line number 0) with therecorder package and would greatly appreciate any insights or assistance you can offer

7811
B
10 months ago
C
ChippyShilpaCadet | Tier 2
asked in Developers Forum
How to resolve the issue occurred in the upload document actions of IQ bot package.

Hi,I was trying to upload few documents i using upload document activities in the IQ package.so when i was trying to get the learning server instance which i created before, I was getting an error kind of message.Can anyone please suggest how will i be able to fix the issue,Im attaching the screen shot along with it. 

290
C
10 months ago
B
Bot DevNavigator | Tier 3
posted in Developers Forum
[Share] Bot Framework Package

Custom Package to Simplify Development and Maintenance OverviewDesigned to streamline bot development, enhance logging, and facilitate comprehensive documentation within tasks for A360. Tailored for efficiency, consistency, and ease of use, this package addresses common challenges in bot development and maintenance.Use Cases Framework Templating: Ideal for organizations looking to standardize bot development practices across multiple teams. Detailed Logging: Suited for complex workflows where detailed traceability and error tracking are crucial. Process Documentation: Perfect for documenting automated processes within the bot, ensuring clarity and ease of maintenance.Key FeaturesRobust LoggingGlobal session logger for comprehensive logging across subtasks. Automatic capture of source task details, environment details for enhanced traceability. Visualization of complex/nested variables for efficient debugging and tracking. HTML format for logs to enable monitoring from various devices w

330
B
10 months ago
N
nuraneesCadet | Tier 2
asked in Developers Forum
Email Connect action to Outlook- How to connect to shared mailbox not listed in dropdown

Email connect action for OutlookI am trying to connect to a shared mailbox but the outlook of the current machine it is connected to currently is not in that shared mailbox. Plus, this is a dropdown list, so the use of variable is not allowed.Is there a workaround, in AA itself to allow connection to a shared mailbox using Outlook. Note: Please do not suggest workaround or changes to be made within outlook as it is not possible for my case for some reasons.

40714
N
10 months ago
N
nisargakCadet | Tier 2
asked in Developers Forum
Excel session Package version error from parent to child bot

In Automation anywhere I am facing the error while using the global session excel sheet in child boy errors states as Package version for session "session" is different from parent bot how do i solve this

791
B
10 months ago
D
David JansenNavigator | Tier 3
asked in Developers Forum
Useful Botstore Package in General

I’ve been wondering is there any bot store package that can be use to many kind of projects.For example there is “difference between dates” package that gives us the range between two dates just by inputting 2 dates with the same format. this can be used generally across many kind of projects.I can’t help but wonder if there are some usefull packages that i haven’t found yet

512
B
10 months ago
C
Chris DelaneyCadet | Tier 2
asked in Developers Forum
Clicking a button in MS BI

I am haveing a problem I am trying to export a report from Microsoft Power BI.  I am confused because in development all of the things that I have tried (listed Below) all work when my screen is up.  However when I publish it and do not watch the bot all of them fail.  I have included the error message corresponding to each methodStandard capture (I have also tailered the properties down to just the DOMXpath where the button is.) Unable to find BUTTON. Search Criteria did not match. AI Sense Capture (including recording an anchor). Control not found. Mouse Click (Using both application, browser, and screen) No error because the button is never pressed so the wait condition that is looking for the file never comes true so the bot just keeps running. I have attached a picture of the button that I am trying to press. There are some redactions.Any help the community can provide would be great.  Thanks. Respectfully Requested,Chris Delaney

210
C
10 months ago
Ganesh Bhat
Most Valuable Pathfinder
Ganesh BhatMost Valuable Pathfinder
posted in Developers Forum
[RESOLVED] How to fix error occurred while reading browser list from device

[RESOLVED] How to fix error occurred while reading browser list from device If you're encountering the error "Error occurred while reading browser list from device," it's crucial to ensure that the 'Automation 360' browser extension/plugin is enabled. Error occurred while reading browser list from device Follow these steps to resolve the issue:1. Check the Presence of 'Automation 360' Browser Extension😃 *Open your browser settings and navigate to the extensions/plugins section. Look for the 'Automation 360' extension.* 2. Install 'Automation 360' Browser Extension🌐 *Visit the official [Automation Anywhere documentation](https://docs.automationanywhere.com/bundle/enterprise-v2019/page/enterprise-cloud/topics/deployment-planning/browser-extension-enhancements.html) for browser extension enhancements. Follow the provided instructions to download and install the 'Automation 360' browser extension compatible with your browser.* 3. Enable 'Automation 360' Browser Extension✅ *After installa

9811
D
11 months ago
P
priyankapriyaCadet | Tier 2
asked in Developers Forum
control room urls’s

Hi Team,How to create different control room urls’s for different environments

341
K
11 months ago
A
ajinkyaghodekarGround Control | Tier 1
asked in Developers Forum
Export a bot from Community Edition

Hi All,Can anyone please help me out how can I export bot for community cloud version of Automation Anywhere. And run bot on various systems and make it platform independent.Thanks

7673
K
11 months ago
S
s 9425Navigator | Tier 3
asked in Developers Forum
Deleting a zip folder

Can someone please help with deleting a zip folder, as the Folder package delete option does not recognize a zip file

731
Abhay Naik
11 months ago
K
khondokerNavigator | Tier 3
asked in Developers Forum
Get URL or Filepath of document selected using select File in AARI forms?

Hello,I have created a form where the user selects a file , and I want to save the url or file path of this file so that I can display the file later in the process in another form.How do I achieve this?

200
K
11 months ago
T
TurnerCarnesCadet | Tier 2
asked in Developers Forum
Authentication API with Password

I am able to authenticate using the authentication API (both v1 and v2) using the username and apiKey. However, I’m unable to do so utilizing the username and password. I have validated that the URI, username and password are correct.  Are there perhaps user role permissions that I am missing which cause the issue? Or, is it most likely something that has been disabled internally within my organization? Error response:{    "code": "UM9999",    "details": null,    "message": "An unexpected problem occurred."}

3674
Ritusharma
11 months ago
U
ufuksavasCadet | Tier 2
asked in Developers Forum
Read data from excel to variable (type record)

Hi everyone,I have a question about data from excel. I would appreciate it if someone who knows answer.I created an Excel with email addresses. I have assigned email adresses from this excel as variable(type record) (1)I can see all the emails in the message box. So far there is no problem. (2)I want to use this variable as a “from specific sender” in the email loop. I only want the incoming emails to respond to those on this list. (3)Although I see all the emails in the message box, the email loop only reads the bottom line of the list.I assigned the Excel Row variable by name. Should I get it as an by index? (However, I will add and remove new email to the list and update it all the time)Where am I doing wrong and how can I fix it?Thanks in advance   123 

2118
Zaid Chougle
Navigator | Tier 3
11 months ago
V
vishnu.AGround Control | Tier 1
asked in Developers Forum
Error during process the invoice through DA (Document Automation)

I am getting below Error during process the invoice through DA (Document Automation).C:\ProgramData\AutomationAnywhere\GlobalCache\embedded-resources\3.31.22-316ac269-e26a-11ec-816f-98fa9b82fe50\opencv_java451.dll: Can't find dependent libraries Please contact system administrator. Already TriedReinstall the Bot Agent after clear “AA” folder from C drive.Provide Full control to user Please help me to resolve the error

240
V
11 months ago
P
PatwaryNavigator | Tier 3
asked in Developers Forum
SAP GUI application not installed. Install the SAP GUI with patch version 9 or above, and try again

After installing new windows on a system, after installing SAP again, running SAP Login bot on A360 shows the following message...."SAP GUI application not installed. Install the SAP GUI with patch version 9 or above, and try again."But I already installed SAP 750.Requesting solution from Expert to solve this problem. Advance ThanksPatwary

2192
Tamil Arasu10
Most Valuable Pathfinder
11 months ago
M
MadevanCadet | Tier 2
asked in Developers Forum
Issue in Sending Email Using Outlook Bot

Outlook Operations using DLLUnable to Send Email. Using this bot from botstore.  Below is the error Message: “Send Email Status: [ERROR]:System.Runtime.InteropServices.COMException (0x80004004): Operation aborted (Exception from HRESULT: 0x80004004 (E_ABORT))   at Microsoft.Office.Interop.Outlook._MailItem.get_Recipients()   at OutlookWrapper.OutlookWrapper.PopulateCollectionForMail(MailItem Mail, COLLECTIONTYPE CollectionType, String Items)   at OutlookWrapper.OutlookWrapper.SendMail(String ToRecipients, String CcRecipients, String BccRecipients, String Subject, String Attachments, String Body, String IsBodyHTML, String ReplyRecipients)has context menu”regardsMadevan 

1631
P
11 months ago
E
emoyanoCadet | Tier 2
asked in Developers Forum
Issue with .jnlp files while a bot is running

Hi,I'm experiencing issues with running .jnlp files while a bot is executing. Before running the bot, the .jnlp files open correctly, but after a certain point (specifically after a recorder in the Edge browser), they can no longer be executed. After aborting the bot, the .jnlp files work properly again. Currently, your workaround involves reinstalling Java after the bot passes the Edge recorder, allowing the .jnlp files to open.We have also determined that this issue occurs during the call to another taskbot. Interestingly, we have another bot that makes the same call and does not encounter the same problem with that recorder.Has anyone else experienced a similar issue with Java?Thank you! 

1723
P
11 months ago
S
SrikanthVGround Control | Tier 1
asked in Developers Forum
Decode the Url

Hi All,  I want to decode the URL to plain text, is there a direct command using automation anywhere.  example : encoded Url : https://edd.ca.gov/en/about_edd/employer_services_online/Decoded Url :https%3A%2F%2Fedd.ca.gov%2Fen%2Fabout_edd%2Femployer_services_online%2F

841
B
11 months ago
K
khondokerNavigator | Tier 3
asked in Developers Forum
Document Extraction, Get Document Data Action: How to access dictionary saved?

Hello , I am using the Get Document Data Action from Document Extraction package to extract the data from a document that was processed using IDA and I am saving the output in a record as shown below.According to the documentation I can access the  values for following keys in the output record.I am able to get a JSON string properly using $DocData{DocumentJson}$ but I am unsure of how to get the dictionary object and access values (document fields) from that dictionary.  

750
K
11 months ago
Terms & ConditionsCookie settings