Forums

im getting this notifications but i have control room license till July endIdentified over consumption of licenses on your Control Room. Ensure you release licenses and re-sync licenses from Server, for Control Room operations to run further. Failed to do, your Control Room will not be available for further operations from Thu, 23 May 2024 23:59:59 UTC.Can anyone help? 

Team,I have Some issue with string with wild card,I have a file under desired folder as "DSRSummaryReport_Sponsor_AU_2024-06-05-2.xls" 1. "DSRSummaryReport_Sponsor_AU_" is created under String named $DSR$2. "2024-06-05" is created under string named $vTodaysDate$3."-2" is treated as wild card "*"when I try to move the file from one folder to another folder using string as "D:\EP FILES BACKUP\RECON360 MOVER\OUTPUT\$DSR$$vTodaysDate$*.xls" to destination folder were not moved, (cross checked with message box action whether the file name is right or not) but,when I try to move without string but using wild card function as "D:\EP FILES BACKUP\RECON360 MOVER\OUTPUT\DSR*.* to destination folder were moved ,is there anything issue with string with wild card  functions ?@Tamil Arasu10 can you help to address this issue? 

I need the ability to either 1) move a queued task from server 1 over to server 2, or 2) the ability to deleted a queued task from the server.I’m actually surprised that a task needs to be active before any kind of action can be done on it. But I really could benefit from the above two mentioned capabilities. I had a need to rerun an overnight task that runs for 7/8 hours. However, it will now run for 14+ hours during the day. My daily scheduled tasks for that server have backed up. But I cannot remove them because the control room does not provide that functionality.If someone can correct me on that, that would be much appreciated. But if the control room cannot move or remove a queued task, I would like that to be a feature request. The RPA market has matured to the point where full fledge mainframe-like job admin abilities are needed.Thanks for your time and consideration, dvnI should probably describe my environment. We have two job runners, each running on two separate servers. We

Hi all, Do we have any knowledge article/Documentation on where the documents will be stored before and after extraction in Document Automation in On-Premises Control Room ?Is any data will be shared in order to extract the data from OCR Engines ? Thanks

i have to extract data from web and pste it into excel but what actually problem is  unstructured  we have to capture this data table and put it into excel...but formats are different in every file2nd format3rd format 

What I would like to know:How to use the “File” type Variable “Desktop Folder or File” > “Regex” feature My assumption is that if I state the folder path properly (i.e. “C:\Users\MyUser\Documents\folder”)And then in the regex section of the properties I state:String: “example ”Pattern: [A-Za-z0-9]+String: “.xlsx”I would expect the File variable to target the only file in that folder that matches the pattern, but when I run the bot the File path string returns empty.The regular expression that should be working with should be:C:\\Users\\MyUser\\Documents\\folder\\example [A-Za-z0-9]+\.xlsxand I would expect it to catch the single file called:C:\Users\MyUser\Documents\folder\example A1.xlsx Am I doing something wrong? and if so, where?Or maybe this interaction is not within the scope of the regex functionality of the File type Variable, and if so, then what would it be it’s intended function? Thanks

Hi All,I have an use case which needs to fetch details from external vendor using Private CA certificate key. How do we achieve this using A360?, we have purchased CA certificate from Setigo, and it has been passed to external vendor to configure in their server.let me know if we have any knoledge base article.Thank You

Hello everyone,How do i get the list of attachment names from an email and perform subsequent actions only to emails with specific attachments?Downloading attachments for every email and constructing a list causes a lot of unnecessary traffic, so it is to be avoided at all cost.Thank you for the help.

Hi there,I am trying to automate a process which requires human interaction. My requirement is bot read the inbox and filters email that contains attachments. Downloads the attachment and then creates a task for user to view/review the downloaded document in a form. User logs in AARI portal to work on the task and clicks submit in the form. Now a task bot replies back to the user with an email text.Read outlook (Scheduled Task Bot) → Filter email with attachment(Task Bot) → Create task for user to view attachment(AARI form)→ User submits the task(AARI form) → reply to the email(Task Bot).I am planning to use process automation. When I create a process the first step process entry has to be form or input variable. In my case I want to attach a task bot. How do I design this process ? 

We want to use the AARI tool, but the end user will run this on their local devices. The AARI license will be allocated to the user. What are the roles and licenses required to run the AARI process on same /local device

Hi, I built a C# DLL to use in a bot on AA. Included in the DLL is a database connection via Entity Framework. I need guidance in getting this DLL to work in the bot. As the title suggests I am currently stuck with an “No connection string named 'cims3_iemas_trnEntities' could be found in the application config file.” error. I added the “.dll.config” as well as the “app.config” as a dependency in the bot along with all the related DLLs such as EntityFramework.dll and EntityFramework.SqlServer.dll. The connection string is definitely in both the config files. Note that I added the App.config file to try and get past this issue. 

sql query was working properly but i changed my server and now it is odbc server 32 bit :my query is as follows:INSERT INTO [GLENTRY$$] (SL_NO, JD_MAIN_ACNT_CODE, JD_DIVN_CODE, JD_DEPT_CODE, JD_EXCH_RATE, JD_CURR_CODE, JD_DRCR_FLAG, JD_FC_AMT, JD_LC_AMT, JD_DESC) VALUES ('$strSerialNumber$', '$strJD_MAIN_ACNT_CODE$', '$strJD_DIVN_CODE$', '$strJD_DEPT_CODE$', '$strJD_EXCH_RATE$', '$strJD_CURR_CODE$', '$strJD_DRCR_FLAG$', '$strDebitAmount$', '$strDebitAmount$', '$strJD_DESC$')i get the syntax error with timeout message There is a syntaxical error in the message box

i am using a loop which there is search textbox where i put the data that i get from excel and paste it and extract some data and do some steps and paste into same excel in diffrent columns but it iverwrite the data in the same column doesnt move forward to other rows

I currently have a robot that has functions to open dropbox → points to download images → skips past a login to straight download → save file. Currently the bot runs fine when accessed via controller to test, however the issue arises when scripting the bot server to run. The error occurs when the bot runs the first time and doesn’t repeat the error again when manually fixed and looped back over the same actions. The error is that the bought minimizes the screen to dropbox randomly, then can’t reopen the process. I tried to script a [ALT DOWN][TAB] error handler but no such luck. Please advise why the bot without a rule to minimize would minimize the screen.  

I am using Community edition and previously captured a specific portion of a website using the Object (auto-detect) feature, with the technology type set to HTML. However, when I attempt to capture the same portion again using the same technology, it now captures the entire box instead of just the specific portion. Why is this happening? Has anyone else encountered this issue?   Earlier i was able to capture the particular text as shown in the image Now When i am capturing whole box is getting captured and not the particular text in the box 

Device: (CHTSSWL00009) is either disconnected or it needs to be upgraded.If the problem persists, please contact your system administrator.

I’m not able to select the tabs below in advance loads using capture or simulate:  

I am working through the Getting Started with the Recorder Package lesson through AAU and attempting to follow along. On step 2 using “capture” in the browser i get this error:“Error occurred while reading browser list from deviceIf the problem persists, please contact your system administrator.”And nothing has worked to fix it. I haven’t changed anything in my browser settings since it was working in the citizen developer path and I am incredibly frustrated with this application. Can you please help me resolve this issue? 

Hi everyone,I have a loop set up that loops through records 50 at a time until the end of the day’s transactions. I would like to build a dataset of all records retrieved from each run of the loop to be exported to Excel. I thought about using a list but I cannot seem to find the right actions to append the data in within each iteration. Could someone give me some guidance or suggest a better way to attack this please?TIA,Steve

Hello,I uploaded a .exe file in Control Room. Problem is I cannot run it from there. Is there any way I can run a .exe file that I uploaded in the control room? I can only do it via local file.Please advise. Thanks!

java.lang.RuntimeException: {"message":"Error creating RDP session.","details":"[13:00:14:157] [11160:0000170c] [ERROR][com.freerdp.core.connection] - Timeout waiting for activation","correctiveAction":"","code":"rdp.error"}

Hi everyone,I have a question about data from excel. I would appreciate it if someone who knows answer. I want to apply more than one filter to a single column with the filter command, but I could not do it.I need to put a date filter in the column. (Today's date)But I couldn't do this with text or number filter.Is it possible to do this with AA360? Thanks in advance.

BOB back again, I’ve recently tried to state a if statement with Date = Date. I have excel pulling a date out of its spreadsheet listed as something like 6/1/2024, When I use this if statement I have it see if that date matches the current system date. When formatting the date I use MM/dd/yyyy, it throws this error for me: “The target date/date time format has been entered incorrectly. Please enter a valid date value/format value.”

Using "Recorder: Capture" with technology type Microsoft UI Automation (COM) with action "Left click" (see attached) every once in a while results in the error "Unable to perform 'Left click' action. Object is found but not able to play the action".What causes this error, and how can I prevent it?