Developers Forum

An unknown error happens when I try a bot with the Open Excel command. This is the message: "An unknown error occurred when executing the 'OpenExcel' command. To continue, contact your system administrator." I have excel and path is c drive.

Hi All,How we can migrate UiPath bots to AA360 bots and any utility available for this ? 

Hey team,I’m Emmanuel Katto from Dubai, United Arab Emirates (UAE) currently working on using the tool to register:capture determine if a checkbox is checked or not. While I can easily toggle its status with a left click, I’m unsure how to retrieve its current status.Does anyone have suggestions or methods that could help me with this? Any insights would be greatly appreciated!RegardsEmmanuel Katto

Hello team,I am not able to install or uninstall bot agent in my machine. I am getting network resource unavailable error every time. I tried to uninstall the bot agent from control panel and still getting the same error.Please help me with this issue. Attached the error message here.Thanks in advance.   

Hi,I created a new learning instance (Invoices - Vatsal - Training 2024-10-21) but when I click on Process action, nothing happens and my request remains in the Open state in the View status queue.I am NOT able to move ahead with the Week 2 Game Plan trainings due to this issue. Kindly help resolve this issue. Thanks,Vatsal

How to get file creation date and time using AA 360

When the development machine grabs the specified element from the web page, it works fine. But if you run it on another computer, you can't catch the specified element

I have successfully installed the control room and configure , Had tested with MessageBox several days ago and it worksWith unknown reason, all device is disconnected now unexpectedly ,  Any pontential reason for this  

When I try to use the promote bots feature to move a bot across the control room, I’m getting the following error:Cannot connect to the target control room, reason - PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested targetIf the problem persists, please contact your system administrator.Code: blm.target.cr.cant.connect The bot is being promoted from Automation 360 build 23186 to Automation 360 build 19688, both control rooms are on-premise and support the promote feature. 

Hello teamAt  thetime of  execution of my Automation Anywhere bot, I faced an error message stating 'Unable to Locate Element' when trying to interact with a specific element on a web page. I've verified that the element exists and have checked the selectors, but the issue not resolved.Has anyone else faced a similar problem during bot execution, and if so, how did you resolve it? Any help would be greatly appreciated. Checked https://docs.automationanywhere.com/bundle/enterprise-v2019/page/enterprise-cloud/topics/control-room/bots/my-bots/cloud-first-bot.htmlrpaThank you gregbowers

Hello everyone, I would like to use the register:capture tool to know if a checkbox is checked or not.I can perfectly do a left click that will switch it status, but how to get its current status ? Does anyone have a clue ?

I am trying call python script from A360 community edition. I am using Python package to call python exteral script.When I am execution bot it is thowing error "Failed in Python executopm" I tried same script on command prompt and it is giving me expected output. I cheked "Bot_Launcher.log" file and found exception is generating.  Caused by: java.io.IOException: The pipe is being closed at java.io.FileOutputStream.writeBytes(Native Method) ~[?:?] at java.io.FileOutputStream.write(Unknown Source) ~[?:?] at java.io.BufferedOutputStream.flushBuffer(Unknown Source) ~[?:?] at java.io.BufferedOutputStream.flush(Unknown Source) ~[?:?] at sun.nio.cs.StreamEncoder.implFlush(Unknown Source) ~[?:?] at sun.nio.cs.StreamEncoder.flush(Unknown Source) ~[?:?] at java.io.OutputStreamWriter.flush(Unknown Source) ~[?:?] at java.io.BufferedWriter.flush(Unknown Source) ~[?:?]

I want to use the “Launch EIB” action in the Workday Package of A360. The authentication step is going through fine and the 2nd step of Launch EIB is erroring with this message. The workday Session name is for sure the right name and the steps mentioned in the documentation were followed to get Integration ID.Need help fixing this error.

when I am running the BOT first time , I am getting below error Could not create a folder 'My Docs' in the file path ' C:\Automation Anywhere'. Make sure you have the required write permission to create folders there and try again.Please help me how to resolve it

Hi guys, Can you think of any AA solution how I could read newly published news from different websites and social media?Some of the website has RSS feed some of the websites have only the option to subscribe for the email news… Thank you 

Dear AA community,While I run a task then I stopped it. Now It showing pending execution error.I try to delete my device but it showing like this. 

How to fix this issue?

Hi, I was working for a POC with IQ BOT today (community edition) and was able to extract the data successfully when I trained it in AI Documentation BUT when I tried to call the learning instance in AA command IQ BOT Extraction360, only the Total amount was not extracted properly. The total amount on the input file was placed in table, and I suspect that is the problem because in learning instance the total amount field was placed in the form. Can you help me on this.  

please I need assistance and clarification with my request, I am having an issue with trying to access the control room in automation anywhere, I am getting an error. kindly see below.   

Getting an error when trying to use the JSON deserializer to Table option. Does anyone know what this error means? Exception Occurred, refer to bot_launcher.log for details For input string: “95.0”. The JSON string is valid.

Hi Team,I am working on an automation which needs to click on a “variable text” which can be anywhere in then page. I have done similar task in UiPath using “Find OCR” activity to which I pass the variable ( which stores the text to look for) and it works perfectly.Any help how to acieve same in Automation Anywhere, new here in Automation Anywhere.

Hallo,I have a Control Room on-premise (rev.33) installed on 500GB disk space VM and it got a sudden disk overusage and now its 0GB space of 499GB available.The curious thing that checking all the folders on a disk get me a 68GB of disk usage.I found in the Monitoring logs below inputs:“[ERROR] 2024/07/09 08:46:14.746373 Error: File IO Fail Module: FileSystemLatencyMonitoring Method: getReadFileLatency Error Message: Error occured in Read file operation Underlying Error: EOF[INFO] 2024/07/09 08:46:17.607182  ProcessMapUpdater : Execute : Updating process map[ERROR] 2024/07/09 08:46:17.607714  ConfigChangeDetector : Execute : Fi

Good afternoon!Problem 1:With the Excel advanced package, there doesn’t seem to be any option to format cells without Macros.As my organization is expected to disable all macros across the business due to security policy, this is not a suitable (or sustainable) workaround.I can see that we can get cell colour… but not set cell colour (or any other formatting options) without running a macro.Although this isn’t a huge issue, it does leave me with plain header cells when dynamically creating them, it effects the aesthetic of the resulting excel workbook.Problem 2:As the Set Cell function requires a string to be entered, this causes the value entered on the spreadsheet to always be text, even if that is a number. There is no option to convert the number stored as text to n

Any ideas or suggestions how to prepare for Automation Anywhere Certifications. I have paid 5$ but it is valid till 30th September only. Till I have not written any AA certifications.Could anyone please mention where to start and proceed? Thanks

How do I create a DateTime variable with a default value of 10:00 AM for the time, and a a default value of [today] (i.e. today's date, whatever that happens to be on the day I wish to use the variable) for the date. The Edit Variable function will only allow me to set a default value for either BOTH the Date and the Time, or neither the Date and the Time. I want to set the default value for ONLY the Time four use on any day I use the variable. See attached.