Skip to main content

Developers Forum

The place for Developers to share and learn.

  • 4,021 Topics
  • 10,574 Replies
4021 Topics
A
Andrea.C1Partner
asked in Developers Forum
Using DeploymentId and Viewing Activity via AA360 API

Hi everyone,I recently deployed a bot using the AA360 API with the following payload:{  "fileId": //BotId,   "runAsUserIds": [    //UserID  ],  "poolIds": [],  "overrideDefaultDevice": false,  "callbackInfo": {    "url": "https://callbackserver.com/storeBotExecutionStatus",     "headers": {      "X-Authorization": "//token"    }  }}Everything works fine, and in the response I receive both a deploymentId and an automationName.However, I'm struggling to understand how I can actually use the deploymentId. What is its specific purpose within the API?Additionally, I'm wondering if there is an API that allows me to view in-progress activities or access a historical table of executions, similar to what can be viewed in Control Room. So far, I’ve only found the API for the AUDIT log, but nothing akin to an Activity table or In-progress executions.Has anyone dealt with this issue or have any suggestions on how to proceed?Thanks in advance!

292
A
1 month ago
K
Katy 1764Customer
asked in Developers Forum
Unable to use Promote Bots and Files feature

When I try to use the promote bots feature to move a bot across the control room, I’m getting the following error:Cannot connect to the target control room, reason - PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested targetIf the problem persists, please contact your system administrator.Code: blm.target.cr.cant.connect The bot is being promoted from Automation 360 build 23186 to Automation 360 build 19688, both control rooms are on-premise and support the promote feature. 

312
K
1 month ago
K
Kishore.K6Customer
asked in Developers Forum
User not logged into the machine

I have updated the password and username in the Bot agent device settings credentials. But still facing the error as  “User not logged in to the machine”. Can you please help me with it ? 

292
K
1 month ago
G
gregbowersMember
asked in Developers Forum
Unable to Locate Element

Hello teamAt  thetime of  execution of my Automation Anywhere bot, I faced an error message stating 'Unable to Locate Element' when trying to interact with a specific element on a web page. I've verified that the element exists and have checked the selectors, but the issue not resolved.Has anyone else faced a similar problem during bot execution, and if so, how did you resolve it? Any help would be greatly appreciated. Checked https://docs.automationanywhere.com/bundle/enterprise-v2019/page/enterprise-cloud/topics/control-room/bots/my-bots/cloud-first-bot.htmlrpaThank you gregbowers

603
Micah.Smith
1 month ago
A
AugustinPartner
asked in Developers Forum
How to know if a checkbox is checked or not

Hello everyone, I would like to use the register:capture tool to know if a checkbox is checked or not.I can perfectly do a left click that will switch it status, but how to get its current status ? Does anyone have a clue ?

857
D
1 month ago
L
leoarthur255Member
asked in Developers Forum
Exploring Intel Arc GPU Compatibility with Automation Anywhere’s Cloud Solutions: Performance and Integration Insights

Hello, Automation Anywhere Community!I hope you all are doing well. I’ve recently been exploring various GPU options to boost the performance of Automation Anywhere (AA) bots, particularly within cloud-based environments. My focus has turned to Intel’s new Arc GPU lineup, and I wanted to start a discussion about how well these GPUs integrate with Automation Anywhere’s cloud solutions.Key Areas of Discussion1. Compatibility with Automation Anywhere’s Cloud ArchitectureHas anyone tested Intel Arc GPUs with AA’s cloud solutions? I know Automation Anywhere supports both on-premises and cloud deployments, but I’m wondering if Intel Arc GPUs are natively supported in the cloud environment. Are there any known challenges or limitations in setting up the Arc GPUs with AA’s cloud architecture?2. GPU Acceleration in Automation TasksCan Intel Arc GPUs significantly improve the performance of bot execution in the cloud? Automation Anywhere bots, especially when used for complex workflows like data

120
L
1 month ago
P
Parimal 2224Partner
asked in Developers Forum
Failed in Python execution

I am trying call python script from A360 community edition. I am using Python package to call python exteral script.When I am execution bot it is thowing error "Failed in Python executopm" I tried same script on command prompt and it is giving me expected output. I cheked "Bot_Launcher.log" file and found exception is generating.  Caused by: java.io.IOException: The pipe is being closed at java.io.FileOutputStream.writeBytes(Native Method) ~[?:?] at java.io.FileOutputStream.write(Unknown Source) ~[?:?] at java.io.BufferedOutputStream.flushBuffer(Unknown Source) ~[?:?] at java.io.BufferedOutputStream.flush(Unknown Source) ~[?:?] at sun.nio.cs.StreamEncoder.implFlush(Unknown Source) ~[?:?] at sun.nio.cs.StreamEncoder.flush(Unknown Source) ~[?:?] at java.io.OutputStreamWriter.flush(Unknown Source) ~[?:?] at java.io.BufferedWriter.flush(Unknown Source) ~[?:?] at com.automationanywhere.synchronous.messenger.StandardInputOutputMessenger.send(StandardInputOutputMessenger.j

5093
A
1 month ago
R
rajeshs105970Partner
asked in Developers Forum
Bot Launcher for user session crashed.

 Hi all,I face this issue multiple times  during bot run in single day“Bot Launcher for user session  crashed”please help me to short out this issue. 

27743
Shoeb Shk
1 month ago
S
Automate the Universe SME
spandana 4141Automate the Universe SME
asked in Developers Forum
Launch EIB Issue

I want to use the “Launch EIB” action in the Workday Package of A360. The authentication step is going through fine and the 2nd step of Launch EIB is erroring with this message. The workday Session name is for sure the right name and the steps mentioned in the documentation were followed to get Integration ID.Need help fixing this error.

483
A
1 month ago
B
Bruna 9578Partner
asked in Developers Forum
Error: java.net.ConnectException: Connection timed out: connect / Fetch global values failed

Hello everyone,Recently, I've been experiencing some issues with my bot executions. I'm encountering random errors such as "java.net.ConnectException: Connection timed out: connect" and "Fetch global values failed".I've tried to solve it by clearing the global cache, as well as reinstalling the bot agent, but the problems persist.Does anyone know how to solve these?

510
B
1 month ago
K
kjampaniMember
asked in Developers Forum
BOT running error

when I am running the BOT first time , I am getting below error Could not create a folder 'My Docs' in the file path ' C:\Automation Anywhere'. Make sure you have the required write permission to create folders there and try again.Please help me how to resolve it

171
K
1 month ago
E
EvaGCustomer
posted in Developers Forum
Reading newly published NEWS from 30 webpages and 20 social media

Hi guys, Can you think of any AA solution how I could read newly published news from different websites and social media?Some of the website has RSS feed some of the websites have only the option to subscribe for the email news… Thank you 

90
E
1 month ago
J
jeganmuraliMember
asked in Developers Forum
My bot got struck, Status: Pending Execution

Dear AA community,While I run a task then I stopped it. Now It showing pending execution error.I try to delete my device but it showing like this. 

2854
A
1 month ago
U
Usama Ali FarooqPartner
asked in Developers Forum
Bot scheduler in automation anywhere Community edition

HiWe are doing a Proof of Concept on community edition and want to schedule a bot to run every 5 minutes. Is there a bot scheduler available in community edition? if not, what alternate options we have available in community edition?

492
U
1 month ago
F
fhsilva.iaCustomer
asked in Developers Forum
Device Status cia API

How do I check the status of devices in the Control Room via API?

191
Tamil Arasu10
Most Valuable Pathfinder
1 month ago
J
jnietoPartner
asked in Developers Forum
an unexpected problem occurred if the problem persists please contact your system administrator

When I try to connect to my computer it sends me this error.If I install the agent, let me install the extension, but at the time of making the connection I get that pop-up window.Note: Previously it was linked users on another computer which was unlinked from the other computer.Tnku. 

391
Tamil Arasu10
Most Valuable Pathfinder
1 month ago
J
Joe_Zhou at InsigniaCustomer
asked in Developers Forum
About Docusign bot

Question about docusign package.I have successfully started a session with correct Integration Key, API account ID, secret key and RSA Keypairs.However, the second command “send envelope” is failed, the error message said “access token expired”And there is no command in regards to grant a token from Docusign.Did I miss something from bot store?Thanks, 

170
J
1 month ago
S
Sandeep.K10
asked in Developers Forum
Why am I getting this error while trying to run a bot? UNKNOWN: User: (username) is already running a bot on device: If the problem persists, please contact your system administrator.

How to fix this issue?

93328
Aaron.Gleason
1 month ago
E
ezestarePartner
asked in Developers Forum
Loop in datatable is super-ultra slow in PRD.

Hi, everyone. Long story short, I build a robot in Dev Vm using a Dev Control Room, exported and imported at Prd Vm (using a Prd Control Room).The robot works perfectly in Dev performing from begining to end in less than 18 minutes, meanwhile it works forever in Prd (more than 18 hours till killed).I can’t find the reason. Let me provide a deeper context.Input files and data are exactly the same. I’ve got 2 Prd and 2 Dev environments available (each environment meaning a Vm and its own Control Room). The Robot works well in both Dev env, meanwhile, it does not work properly in either Prd env. The Vms have the same hardware specifications. About this point, it is significant to note that in Prd, the CPU is completely consumed when looping.This only happens in Prd. In Dev the CPU goes smoothly while doing the exact same process.Other packages used by this Robot are​​​​: Web, Excel Basic, CSV, OCR, and so on. They work perfectly. While Exporting-Importing, packages were not included, but

632
E
1 month ago
J
JLogan3o13Member
asked in Developers Forum
Recorder action not timing out

I am curious if anyone else has seen this. I inherited a bot that manipulates the UI of a medical provider webpage. I was told the bot has been failing in production for a long time, but the errors (due to insufficient logging) were vague at best. After troubleshooting the process I found the issue is not that the bot is failing but that it hangs, and I have narrowed it down to a particular step.The step in question is a simple Recorder step that clicks on one of three tabs (below). It seems from time to time the window closes or the tab is somehow not found. The interesting thing is the step completely ignores the timeout that is set. It simply hangs at this point and does not error out. In the production run of this bot, I found an instance where it stayed - stuck at this step - for days, while other bots filled the queue waiting to run. I have since added a timeout of 120 minutes under this bot’s settings page, and it is at least failing out now. But what I do not understand is why

985
J
1 month ago
interplan
interplanMember
asked in Developers Forum
"Feasibility Matrix" and "Complexity Calculator"

Guys, I need a "Feasibility Matrix" and "Complexity Calculator", in Excel, to be able to evaluate processes that can be automated. Could anyone help? Thanks in Advance

390
interplan
1 month ago
S
sang12345Partner
asked in Developers Forum
IQBOT Issue- Unable to extract Total Amount

Hi, I was working for a POC with IQ BOT today (community edition) and was able to extract the data successfully when I trained it in AI Documentation BUT when I tried to call the learning instance in AA command IQ BOT Extraction360, only the Total amount was not extracted properly. The total amount on the input file was placed in table, and I suspect that is the problem because in learning instance the total amount field was placed in the form. Can you help me on this.  

424
D
1 month ago
G
giodeyMember
asked in Developers Forum
UNABLE TO ACCESS CONTROL ROOM IN MY SYSTEM

please I need assistance and clarification with my request, I am having an issue with trying to access the control room in automation anywhere, I am getting an error. kindly see below.   

251
D
1 month ago
cristian.bastidas
cristian.bastidasPartner
asked in Developers Forum
How to refresh OAuth Connection Tokens?

Hi, I’m facing a problem with OAuth connections.I’ve already configured the connection, and it is working fine. But, after an hour the token status is “expired”. I don´t know how to proceed to refresh the token automatically.I’m using Microsoft Entra. 

190
cristian.bastidas
1 month ago
M
MK101280Customer
asked in Developers Forum
JSON Deserializer to Table Error

Getting an error when trying to use the JSON deserializer to Table option. Does anyone know what this error means? Exception Occurred, refer to bot_launcher.log for details For input string: “95.0”. The JSON string is valid.

393
Tamil Arasu10
Most Valuable Pathfinder
1 month ago
Terms & ConditionsCookie settings